Original M5Stack Scale Kit with Weight Unit – PartsCountry

Description

The M5Stack Scales Kit is a high precision low-cost weighing kit. This digital Scales kit is consist of four pieces of half-bridge resistive strain gauges, with a total weighing range of 200kgs. It is equipped with a 24-bit A/D converter chip HX711, specially designed for the high precision electronic scale.

The built-in low-noise programmable amplifier supports 32/64/128 times gain adjustment. With the help of an M5Stack core for programming, you can create IoT based weighing scale in just a few minutes!

Note: The Scale Kit will need a cover plate to work with, and the size of the cover plate should not exceed 50cm on one side.

Features

• Total weighing range of 200kgs
• HX711:
  • High precision 24bit ADC
  • Programmable gain amplification 32, 64 and 128
  • 10SPS output data rate
• Half-bridge resistive strain gauge.
  • Output sensitivity: 1.0??0.1mV/V
  • Non-linearity: 0.3% F.S
  • Integrated Accuracy: 0.3%F.S
  • Zero output: ??0.3mv/V
  • Difference between upper and lower impedance of each strain gauge: 0.8??
  • Output (in) impedance: 1000??5??
• Development platform:
  • UIFlow (supported soon!)
  • Arduino

Package Contents

• 4x Half-bridge resistive strain gauge
• 1x Weight Unit
• 1x HY2.0-4P Cable (20cm)
• 4x Double-sided adhesive paper (39 * 20 * 0.8mm)
• 4x Double-sided adhesive paper (39 * 12 * 0.8mm)

Specifications

Specifications	Parameters
HX711	Output Sensitivity: High Precision 24bit ADC
	Programmable Gain Amplification 32, 64, 128
	10SPS Output Data Rate
Half-Bridge Resistance Strain Gauge	Output Sensitivity: 1.0??0.1mV/V
	Nonlinearity: 0.3%FS
	Comprehensive Accuracy: 0.3%FS
	Zero Output: ??0.3mv/V
	Difference between the upper and lower impedance of the strain gauge: 0.8??
	Output (input) impedance: 1000??5??
Gross Weight	92.5g
Net Weight	126.3g
Packing Size	105mm x 65mm x 40mm

Resources

• Product Documentation
• Installation Diagram
• HX711 datasheet
• Schematic
• Examples
  • Scales kit with M5Core
  • Scales kit with M5Core2
  • Scales kit with ATOM
  • Scales kit with M5StickC
  • Scales kit with M5StickC Plus
  • Scales kit with CoreInk
  • Scales kit with M5Paper
• HX711 Library

Pin Mapping

M5CORE – PORT B	G36	G26	5V	GND
WEIGHT UNIT	DATA Pin (DAT)	CLOCK Pin (CLK)	VCC	GND