Original M5Stack CoreS3 SE ESP32S3 – PartsCountry

Description

The M5CoreS3 SE is a lighter version of the third-generation CoreS3 unit from the M5Stack development kit series. Powered by the ESP32-S3 with a dual-core Xtensa LX7 processor running at 240MHz, it includes 16MB FLASH and 8MB PSRAM, supporting program downloads via a USB Type-C connector?which supports OTG and CDC functions, making it convenient to connect USB devices and burn firmware.

It features a 2.0″ capacitive touch IPS screen, a low-power AXP2101 power management and a 4-way power flow control circuit for low power consumption. There is also a MicroSD card slot and a BM8563 RTC chip for precise timing. In regards to sound input/output, it includes a 16-bit I2S amplifier with a built-in speaker and dual microphone inputs. It has an independent power button and reset (RST) button on the side, with a built-in delay circuit. This is ideal for IoT, DIY projects, and smart home control.

There is no battery base included with the SE version, but If you click here you can buy one in our store.

For the CoreS3 that includes features the SE doesn’t, click here (Psst, you can find out about the features of both products a bit further down this page)?

Note: Before downloading the program, please be sure to press and hold the reset button for 3 seconds (green light) to enter the download mode, otherwise the download will fail.

M5CoreS3 & M5CoreS3 SE Comparison

Hardware peripheral	M5CoreS3	M5CoreS3 SE
Camera (GC0308)	Yes	No
Proximity Sensor (LTR-553ALS-WA)	Yes	No
IMU (BMI270)	Yes	No
Compass (BMM150)	Yes	No
RTC	Yes	Yes
Microphone	Yes	Yes
Speaker	Yes	Yes
PMIC (AXP2101)	Yes	Yes
16MB FLASH and 8MB PSRAM	Yes	Yes
Touch	Yes	Yes

Features

• Developed based on ESP32-S3, support WiFi @16MB Flash, 8MB PSRAM
• Speakers, Dual microphones
• Capacitive touchscreen
• MicroSD card slot
• High-strength glass
• Support OTG and CDC functions
• AXP2101 power management, low power design
• Supported programming platforms: Arduino, UIFlow

Specifications

MCU	ESP32-S3@Xtensa LX7, 16MB FLASH AND 8MB PSRAM, WIFI, OTGCDC functions
Touch the IPS LCD screen	2.0″@320 x 240 ILI9342C
Power management chip	AXP2101
RTC	BM8563
Speaker	16bits-I2S power amplifier chip AW88298@1W
Audio decoding chip	ES7210, dual microphone inputs
Grove Output maximum current (lithium battery powered)	DC4.2V/940mA
Grove Output Maximum current (USB powered)	DC5V/680mA
Power Dissipation	Battery: Standby mode: DC4.2V/104.64uA Working mode:DC4.2V/109.67mA
	USB power supply: In working mode: DC5V/166.27mA
Product Size	54 x 54 x 15.5mm
Package Size	133.4 x 95 x 21mm
Product Weight	38.4g
Package Weight	55.1g

Resources

• Product Wiki
• Arduino IDE Tutorial

M-BUS Schematic Diagram

Package Contents

• 1x M5CoreS3 SE