Original M5PaperS3 ESP32S3 Development Kit with 4.7" eInk Display (960×540) – PartsCountry

Description

The PaperS3 is a low-power e-ink display controller, powered by the ESP32-S3 microcontroller. It has a 4.7″ touch e-ink screen with a resolution of 540 x 960 and has 16 levels of grayscale. It uses a GT911 capacitive touch panel that gives you dual-point touch and gesture controls. Unlike the usual LCD screens, the e-ink display has a better reading experience with easy-to-read text, low power consumption, and the ability to retain images even when powered off.

It also includes a gyroscope sensor, a buzzer, physical buttons, wake-up actions like lifting and power on/off controls. It also has a MicroSD card slot for additional storage and is equipped with the ESP32-S3R8 chip with 8MB of PSRAM. An external 16MB flash memory chip adds more storage capacity and faster data access.

There is an 1800mAh lithium battery with charging support, along with an internal RTC (BM8563) that provides sleep and wake-up functionality for extended battery life. A built-in battery detection circuit monitors the battery status in real time, helping maintain the battery for the long run. A USB-C port is at the bottom of the screen for power.

In terms of expansion, the back of the PaperS3 includes an open HC1.25-4P connection for adding external sensors and devices. It also supports OTG, letting you use more devices to connect and exchange data easily.

Note: Due to timing issues with the QC3.0/2.0 protocol in M5PaperS3 firmware, there is a risk of PD generating high voltage and damaging the device. For now, please refrain from using QC3.0/2.0 chargers to charge M5PaperS3.

---

Lithium Battery Shipping: Due to courier restrictions, this product can only be shipped within some countries. With this item in your cart your shipping options will be limited and may cost more than our usual rates. Why?

---

Features

• ESP32-S3R8 Main Controller
• Built-in Gyroscope, Buzzer, and Physical Button
• 8MB PSRAM, 16MB External Flash
• 4.7″ Touch-enabled E-Ink Screen with 540 x 960 Resolution
• 1800mAh Lithium Battery
• RTC Chip for Sleep/Wake-Up
• Low power consumption
• Development Platform:
  • UIFlow 2.0
  • Arduino IDE
  • ESP-IDF
  • Platform.IO

Specifications

SoC	ESP32S3R8, Xtensa? 32-bit LX7 Dual-Core Processor, 240MHz, 2.4GHz Wi-Fi
PSRAM	8MB PSRAM
Flash	16MB External Flash
Storage	Supports MicroSD Card Expansion
Display Screen	4.7″ Touch E-Ink Screen (EPD_ED047TC1)
	Resolution: 960 x 540 Pixels
	16-level Grayscale Display
Touch Function	Supports Two-Point Touch and Various Gestures (GT911 Capacitive Touch Panel)
Sensors	Built-in Gyroscope Sensor BMI270 @ Communication Address: 0x68
USB Function	OTG/CDC/MSC/Firmware Flashing
Power Input	5V@500mA
Peripheral Interface	HY1.25-4P (3v3+GND+2xGPIO) for Extending Sensors and Devices
Battery	3.7V@1800mAh @ Charging Chip: LGS4056H
Battery Connector	SMT-HDR 1.25-2P
Charging Current	5V@176mA
Power Management	PMS150G (Power On/Off and Program Download Control)
	Built-in BM8563 RTC Chip @ Communication Address: 0x51
Buttons	1x Physical Button (for Device Control, Power On/Off, Reset, Download Mode)
Buzzer	Onboard Passive Buzzer
Wi-Fi	Communication range of 111 meters (in open space, with the antenna positioned vertically at 90?? to the ground)
Power Consumption	Low power mode: DC 4.2V / 9.28??A (main power off, gyroscope in low power mode)
	Standby mode: DC 4.2V / 949.58??A (main power off, gyroscope on)
	Operating mode: DC 4.2V / 154.02mA (main power on)
Operating temperature	0 – 40??C
Product Dimensions	121.5 x 67.7 x 7.7mm
Package Dimensions	133 x 76 x 19mm
Product Weight	89.3g
Package Weight	112.9g

Resources

• Product Wiki
• Schematic
• Arduino IDE Tutorial
• UIFlow2.0 Tutorial

Package Contents

• 1x PaperS3