Original Gravity: Digital Capacitive Touch Sensor For Arduino – PartsCountry

Description

This 5.79″ e-Paper module has a 792 x 272 resolution for a sharp and clear display and the e-ink display showcases four vibrant colours: red, yellow, black, and white. Its ultra-low power consumption makes sure it only uses energy during refreshes, making it ideal for projects such as price tags, shelf labels, and industrial instruments.

The display offers a >170?? wide viewing angle and a paper-like appearance, remaining visible in ambient light without backlighting. It??s compatible with Raspberry Pi, Jetson series, Arduino, and STM32 via an SPI interface.

Note: Raspberry Pi 5 is NOT included

Features

• No backlight, keeps displaying last content for a long time even when powered down
• Ultra-low power consumption, basically power is only required for refreshing
• Comes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Series/Arduino/STM32)
• Optional for e-Paper driver board:
  • Adapting SPI interface for connecting with controller boards like Raspberry Pi/Jetson Series/Arduino/STM32, etc.
  • Onboard voltage translator, compatible with 3.3V / 5V MCUs

Connection Example – Raspberry Pi 5?

Specifications

Operating Voltage	Raw display: 3.3V
	with driver board: 3.3V/5V
Interface	3-wire SPI, 4-wire SPI
Outline Dimensions	Raw display: 150.92 ?? 56.94 x 1.00mm
	with driver board: 152.50 x 58.50mm
Display Size	139.00 x 47.74mm
Dot Pitch	0.1755 x 0.1755mm
Resolution	792 x 272 pixels
Display Colour	Red/Yellow/Black/White
Grey Scale	2
Full Refresh Time	21s
Refresh Power	<30mW
Standby Current	<0.01uA (almost none)
Viewing Angle	>170??

Resources

• Product Wiki
• User Manual
• Schematics

Pinout

PWR	Power on/off control
BUSY	Busy status output pin
RST	External reset, low active
DC	Data/Command selection (high for data, low for command)
CS	SPI chip selection, low active
CLK	SPI SCK pin
DIN	SPI MOSI pin
GND	Ground
VCC	Power (3.3V / 5V input)

Package Contents

• 1x 5.79″ e-Paper Module (G)
• 1x GH1.25 9-Pin Cable 20cm