Original ESP32-S3 Development Board with 1.28" IPS Round LCD – PartsCountry

Description

This ESP32-S3 Development Board has a 32-bit LX7 dual-core processor, making complex and demanding tasks a lot easier. It integrates a GC9A01 display driver chip, which is made to handle graphics and display-related tasks. It comes with a 1.28″ IPS round LCD, providing a compact yet clear display, and the screen’s IPS technology ensures wide viewing angles and vibrant colours. Speaking of colours, the LCD supports 65K colours and has a resolution of 240 x 240 pixels for rich and vivid graphics and text.

When it comes to motion detection and gesture control, this board has you covered with a QMI8658 6-axis IMU. This includes a 3-axis accelerometer and a 3-axis gyroscope, providing accurate and responsive motion-sensing capabilities.

Note: There are two purchasable options for this board. Please select which one you want before adding it to the cart.

Please note: this board uses a tiny MX1.25 connector for LiPo power. Most LiPo batteries on the market (including ours) use a larger JST fitting. We do not yet stock batteries with an MX1.25 connector, however, you can customise your battery with one of our 1.25mm pitch cables to make a compatible battery yourself (assuming you have the ability, knowledge and tools to do this safely).

Features

• Equipped with Xtensa? 32-bit LX7 dual-core processor, up to 240MHz main frequency
• Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth? 5 (BLE), with onboard antenna
• Built-in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory
• Type-C connector, keeps it up to date, easier to use
• 1.28″ LCD, round IPS panel, 240 x 240 resolution, 65K colour
• QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture
• MX1.25 3.7V lithium battery recharge/discharge header and GPIO headers
• Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
• Integrated with a USB serial port full-speed controller, GPIO pins allow flexible configuring pin functions

What’s on Board

1. ESP32-S3R2
   The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, with onboard 2MB PSRAM
2. W25Q128JVSIQ
   16MB NOR-Flash
3. QMI8658
   6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer.
4. ME6217C33M5G
   800mA output, low dropout, high rejection rate
5. CH343P
   USB to UART chip
6. ETA6096
   High-efficiency lithium battery recharge manager
7. 1.27mm pitch headers
   Adapting multiple GPIO pins
8. BOOT button
   Press it before resetting to enter download mode
9. RESET button
10. MX1.25 battery header
    MX1.25 2P connector, for 3.7V Lithium battery, supports charging and discharging
11. USB Type-C connector
    USB to UART, for programming and log printing
12. 2.4GHz ceramic antenna

Specifications

LCD Parameter
Display Chip	GC9A01A
Resolution	240(H)RGB x 240(V)
Display Panel	IPS
Display Interface	SPI
Display Size	??32.4mm
Pixels	0.135 (H) x 0.135 (V) mm
IMU Parameters
Sensor Name	QMI8658
Accelerator	Resolution: 16-bit
	Measurement Range (Optional): ??2, ??4, ??8, ??16g
Gyroscope Characteristics	Resolution: 16 bits
	Measurement Range (Optional): ??16, ??32, ??64, ??128, ??256, ??512, ??1024, ??2048??/sec

Resources

• Product Wiki
• Schematic

Pinout

Package Contents

• 1x ESP32-S3 Development Board With/Without case (please select when adding to cart)
• (Optional) CNC case option comes with 1x screwdriver