Original 8 x AA battery holder with 5.5mm/2.1037mm Plug and On/Off Switch – PartsCountry

Description

This E-Paper Raw panel has a 400 x 300 resolution, a viewing angle of over 170?? and red, black, yellow and white colours.

Without the need for a backlight, it saves on energy by continuing to keep the latest content you had put on there even when powered down. This means it will consume barely any power, and it will only be needed when it’s refreshing. Online development resources and a manual are included, with examples for Raspberry Pi, Jetson Nano, Arduino, and STM32.

Note: an e-Paper Raw Panel Driver HAT will be needed to run this display. Click here to find one in our store.

If you’re looking for this display with a driver board, click here

Features

• No backlight, keeps displaying last content for a long time even when powered down
• Ultra-low power consumption, basically power is only required for refreshing
• Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi / Jetson Nano / Arduino / STM32)

Specifications

Operating Voltage	3.3V
Connection	3-wire SPI, 4-wire SPI
Outline Dimensions	91 x 77 x 1.00 (mm)
Display Size	84.8 x 63.6 (mm)
Dot Pitch	0.212 x 0.212 (mm)
Resolution	400 x 300 pixels
Display Colour	Red/Black/White/Yellow
Greyscale	2
Full Refresh Time	21s
Refresh Power	<30mW
Standby Current	<0.01uA (almost none)
Viewing Angle	>170??

Resources

• Product Wiki
• Datasheet

Package Contents

• 1x 4.2″ e-Paper Display