Original Gravity: Digital Capacitive Touch Sensor For Arduino – PartsCountry

Description

The AtomS3R M12 is an IoT programmable controller equipped with an M12 camera, making it ideal for high-resolution image capture. It has a 3-megapixel OV3660 camera and is powered by the ESP32-S3-PICO-1-N8R8 main controller, which comes with built-in WiFi, 8MB of onboard FLASH, and 8MB of PSRAM. The device also includes a power management circuit that converts 5V to 3.3V, and it integrates a three-axis BMM150 geomagnetic sensor along with a six-axis BMI270 motion sensor to make it more versatile with different projects.

With UVC (USB Video Class) firmware pre-installed, the M12 functions as a plug-and-play USB camera, meaning it can be used without needing any driver installation. It also supports infrared emission control, adding more functionality to your projects.

Compared to previous ATOM series controllers, the AtomS3R M12 has an improved 3D antenna for enhanced performance and greater stability. It features a Type-C port for power supply and firmware updates, as well as an HY2.0-4P expansion port. For easy expansion, six GPIO and power pins are available at the bottom of the device.

Click here to find another version of this controller, with fewer megapixels and a smaller FOV.

Download Mode

To flash the firmware, press and hold the reset button (for about 2 seconds) until the internal green LED lights up, then release the button. The device will enter download mode and is ready for flashing.

Features

• Integrated ESP32-S3-PICO-1-N8R8 main controller
• 3-megapixel OV3660 camera
• Nine-axis sensor system (BMI270 six-axis + BMM150 three-axis geomagnetic sensor)
• 8MB Flash and 8MB PSRAM
• Supports infrared emission control
• Expandable pins and interfaces
• Development platforms: Arduino, UIFlow, MicroPython

Specifications

SoC	ESP32-S3-PICO-1-N8R8 @ Dual-core Xtensa LX7 processor, up to 240MHz @ USB-OTG
PSRAM	8M PSRAM
FLASH	8M FLASH
Six-axis Motion Sensor (BMI270)	Accuracy: 0.05% (acceleration), 0.05??/s (angular velocity)
	I2C address: 0x68
Three-axis Geomagnetic Sensor (BMM150)	Accuracy: 0.3 ??T
	Mounted on BMI270, obtaining magnetometer data via BMI270
Camera	Sensor chip: OV3660
	Maximum frame rate: 30 frames/second
	Output formats: RAW RGB, RGB565/555/444, CCIR656, YCbCr422, and compression
	Aperture: F2.4
	Resolution: 3MP (3 million pixels)
	Focal length: 1.8??5% mm
	Field of view: FOV 120??
Infrared IR	IR emission distance at ??180??: 12.46m
	IR emission distance at ??90??: 1.45m
	IR emission distance at ??45??: 3.88m
Sleep Current	GPIO-5V power supply: DC5V@11.63 uA
	Grove-5V power supply: DC5V@10.75 uA
	USB-5V power supply: DC5V@92.50 uA (including PD resistor loss)
Reserved GPIO	G5/G6/G7/G8/G38/G39
Operating Temperature	0??C ~ 40??C
Product Dimensions	24 x 24 x 23.8mm
Package Dimensions	47 x 46 x 27mm
Product Weight	54g
Package Weight	85.5g

Resources

• Product Wiki

Pinout

Package Contents

• 1x AtomS3R M12